neon loading charts
Electronica – Loading chart for neon convertors. (Maximum length in electrical meters.)
TYPE  d. 8 mm d. 10 mm d. 12 mm d.15 mm d. 20 mm d.25 mm
Volt / mA Argon Neon Argon Neon Argon Neon Argon Neon Argon Neon Argon Neon
2000/30 1.52 1.25 1.55 1.25  2.15 1.90 2.75  2.15
3000/30 1.83 1.52 2.13 1.83  2.74  2.40  3.66  2.74 4.88 3.60 6.71 5.10
5000/30 3.30 2.40 3.60 3.00  4.80  3.60  6.10  5.10 8.20  7.00  12.20  10.10
7500/30 5.60 4.70 6.10 5.30  7.70  6.50  9.60  8.10 12.10  10.50  18.65  15.60
9000/30 6.80 5.60 7.70 6.45  9.55  8.10  12.10  10.10 16.90  14.65  22.55  18.55
12000/30 9.55 8.10 10.80 9.10  12.90  10.60  16.90  13.80 21.50  18.60  29.10 24.10

IMPORTANT

To obtain the correct loading of the convertor you must add 0.5m for each lamp on the installation.
Example: Four lamps of 1 meter each, you have 4 + (0.5 X 4) = 6, thus 6 meters for loading.
Do not exceed the length recommended in the list above.The loads listed are approximate. They can vary according to the diameter and the number of bends in the tubes, the gass filling pressure, the electrodes used, leakage from the high voltage lines, ect.


Resin Block – Loading chart for neon convertors. (Maximum length in electrical meters.)
TYPE  d. 8 mm   d. 10 mm d. 12 mm d.15 mm d. 18mm d. 20 mm d.25 mm
Argon Neon Argon Neon Argon Neon Argon Neon Argon Neon Argon Neon Argon Neon
MINI 5020 5.8 4.4 6.5 4.8 7.1 5 7.8 5.5 8.5 6 9 6.5  9.5 7
MAXI 9020 9.8 7 11 8 12 8.6 13 8.6 14 10 15 11 16 12
IMPORTANT
To obain the correct loading of the convertor you must add 0.3m for each lamp on the installation.
Example: Four lamps of 1 meter each, you have 4+ (0.3 x 1.2) = 5.2 meters for loading.
Do not exceed the length recommended in the list above. The loads listed are approximate. They can vary according t the diameter and the number of blends in the tubes, the gass filling pressure, the electrodes used, leakage from the high voltage lines, ect.